Wayne ESP45 24-Volt Cast Iron Battery Back Up Sump Pump System

Wayne ESP45 24-Volt Cast Iron Battery Back Up Sump Pump System Review

Wayne ESP45 24-Volt Cast Iron Battery Back Up Sump Pump System Feature

• 2400-Gallon per hour at 10-Feet of lift
• Cast iron construction and finned motor housing helps reduce heat in the DC motor for increased life
• Top suction design helps to prevent debris from entering the pump and also prevents airlocks
• Requires two 12-Volt batteried - not included
• 3-Year limited warranty

ESP45 Features: -Cast-iron battery back-up sump pump system.-Top suction design filters debris and prevents clogging.-Professional grade back-up system keeps batteries properly charged.-Alarm system with status indicator lights lets homeowner know when back-up system is active.-Heavy-duty, cast-iron, high performance pump.-4 Hour silence button with automatic reset.-Pumps up to 3500 GPH @ 0'.-Reliable reed float switch for automatic operation.-1.5'' NPT discharge and cast-iron base.-Phase: Single-phase. Specifications: -Voltage: 24V. Warranty: -3-Year warranty.

Wayne Water Sump Pump Discharge Hose Kit (66023-WYN1)

Wayne Water Sump Pump Discharge Hose Kit (66023-WYN1) Review

Wayne Water Sump Pump Discharge Hose Kit (66023-WYN1) Feature

• WAYNE WATER" SUMP PUMP DISCHARGE HOSE KIT
• 1-1/4" x 96'
• Non-pressure

Sold as each. 1-1/4" x 96'. For use with all types of sump pumps to discharge water outside of the basement at a safe distance from the house. Kit includes: 96' of corrugated hose which may be cut at 8 foot intervals, one male adapter and one steel hose clamp. Manufacturer's number: 66023-WYN1. Country of origin: United States. Distributed by Wayne Water Equipment.

Wayne Pumps Sump Pump Check Valve 57028-001

Wayne Pumps Sump Pump Check Valve 57028-001 Review

Wayne Pumps Sump Pump Check Valve 57028-001 Feature

• 57028-001 SUMP CHECK VALVE
• SUMP PUMP CHECK VALVE

Includes: Two convertible fittings and four hose clamps. Durable thermoplastic valve body and poppet designed to resist corrosion and to stop noise. Handles either 1-1/4" or 1-1/2" OD pipe.

Wayne Water-Powered Sump Pump - Model# EWP10

Wayne Water-Powered Sump Pump - Model# EWP10 Review

Wayne Water-Powered Sump Pump - Model# EWP10 Feature

• Pump uses home water pressure to activate assembly and pump water from sump basin
• No electricity required
• Recommended for households with city water supply only

The Wayne Water-Powered Sump Pump uses home water pressure to activate the assembly and pump water from the sump basin. No electricity required. Flow (GPH): 600, Dimensions L x W x H (in.): 6 x 12 x 6

Little Giant 599303 SPDK 24-Feet Sump Pump Discharge Hose Kit

Little Giant 599303 SPDK 24-Feet Sump Pump Discharge Hose Kit Review

Little Giant 599303 SPDK 24-Feet Sump Pump Discharge Hose Kit Feature

• Works with all types of sump pumps
• Used for both 1-1/4-Inch and 1-1/2-Inch discharge
• Includes 24-foot corrugated polyethylene hose, ABS thread x barbed adapter and galvanized steel clamp
• Ideal for discharging water out of basement sump to a safe location outside of the home
• Replaces SPDK-114 and SPDK-112

Red Lion Universal Discharge Hose Kit Compatible with 1-1/4" & 1-1/2" size pipes/pump...

Glentronics BWE The Basement Watchdog Emergency Sump Pump System

Glentronics BWE The Basement Watchdog Emergency Sump Pump System Review

Glentronics BWE The Basement Watchdog Emergency Sump Pump System Feature

• Pumps 1,000 gph at 10-Feet. of li-Feet and 2,000 gph at 0-Feet. of li-Feet
• User-friendly control panel lights up with a warning and describes what to do for easy maintenance
• A sensor monitors battery fluid levels for increased piece of mind
• Includes controller, charger, dual float switch, pump and battery box (battery sold separately)
• Compact pump can be installed even in small or narrow sump pits

Pumps up to 33.3 GPM, or 16.7 GPM at a 10' lift. Runs over 6 hours continuously on a single charge with the Basement Watchdog standby battery, model

Flotec FP0S1800A-03 1/4 HP 2880 GPH Automatic Submersible Sump Pump

Flotec FP0S1800A-03 1/4 HP 2880 GPH Automatic Submersible Sump Pump Review

Flotec FP0S1800A-03 1/4 HP 2880 GPH Automatic Submersible Sump Pump Feature

• Up to 21,000 gallons per hour
• Trouble-free mercury float switch
• Fully submersible, corrosion-proof construction
• Powerful 1/4 HP motor
• Installs in minutes

The SP-14 submersible sump pump with an Integral Float Switch is designed to provide efficient, trouble-free service in moving large volumes of water. Water out applications ideal for this model are excavation, crawl spaces, basemetns, loading docks, and construction sites.

Little Giant VCMA-15UL 1/50 horsepower 115 volts VCMA Series Automatic Condensate Removal Pump

Little Giant VCMA-15UL 1/50 horsepower 115 volts VCMA Series Automatic Condensate Removal Pump Review

Little Giant VCMA-15UL 1/50 horsepower 115 volts VCMA Series Automatic Condensate Removal Pump Feature

• 1/50 hp high performance motor, 65 GPH at 1-Feet lift
• ABS tank, motor cover, and volute
• 1/2 gallon tank capacity
• Stainless steel pump shaft
• Removable 3/8-Inch barbed check valve

Condensate Removal Pump, VCMA-15UL Is Fully Automatic With 1/2 Gallon Capacity, Features A Vertical Type Pump With Stainless Steel Motor Shaft, Rust Proof, High Impact ABS Tank & Motor Cover, 3 Drain Holes, Removable 3/8" OD Barbed Check Valve, Rated For High Efficiency Gas Furnace Applications That Produce An Acidic Condensate, Thermally Protected Motor, UL & CSA Listed, Pumps 25 GPH @ 10' TDH.

Glentronics, Inc. BW1050 Basement Watchdog Sump Pump, 4400 Gallon Per Hour

Glentronics, Inc. BW1050 Basement Watchdog Sump Pump, 4400 Gallon Per Hour Review

Glentronics, Inc. BW1050 Basement Watchdog Sump Pump, 4400 Gallon Per Hour Feature

• Dual float switches with protective cage
• Industrial strength - continuous duty pump that is built to last
• Efficient permanent split capacitor motor (PSC)
• 10-Feet power cord
• Vertical discharge provides narrow footprint to fin in sump pits as small as 7-Inch dia.

Sold as each. 1/2 HP premium sump pump. Includes dual caged universal mount float switch. PSC motor is extremely energy efficient and will pay for itself in energy savings. Continuous duty construction allows for use in ponds and fountains. Pumps 2820 GPH at 10'. 13' power cord. Piggy back plug. 6.2" diameter fits in narrow pits. 3 year warranty. Boxed. Manufacturer's number: BW1050. Country of origin: Taiwan. Distributed by Glentronics, Inc.

Wayne Water Systems VIP50 1/2 HP 2,500 GPH Submersible Utility Water Pump

Wayne Water Systems VIP50 1/2 HP 2,500 GPH Submersible Utility Water Pump Review

Wayne Water Systems VIP50 1/2 HP 2,500 GPH Submersible Utility Water Pump Feature

• 1/2-horsepower submersible utility water pump can handle material up to 1/2-inch thick without clogging
• Removes water within 1/8-inch of surface
• Glass reinforced housing prevents rust
• Connects to garden hose with 3/4-inch adjustable discharge adapter
• 1-year limited warranty

The Wayne 1/2 HP 2,500 GPH submersible utility water pump can handle material up to 1/2-inch thick without getting clogged. It can pump out 2500 gallons per hour, with a bottom suction that takes out water to within an eighth of an inch of the surface. Glass reinforced thermoplastic for the housing, volute, and impeller prevents rust, the 3/4-inch adjustable discharge adapter easily connects to garden hoses, and an easy-access handle provides complete portability. Wayne backs its pump with a one-year limited warranty. This unique Wayne utility pump passes 1/2in. solids such as leaves, pebbles, and other debris without clogging. 1 1/4in. discharge is adaptable to garden hose thread with rotating adapter (included). HP: 1/2, Flow (GPH): 2,500, Volts: 115, Max. Total Head (ft.): 15, Suction Type: Bottom, Discharge Port (in.): 1 1/4, Pump Housing: Glass reinforced thermoplastic, Volute: Glass reinforced thermoplastic, Impeller Shaft: Glass reinforced thermoplastic, Solid Handling (in.): 1/2, Power Cord (ft.): 8, Thermal Overload Protection: Yes, Dimensions L x W x H (in.): 6 3/4 x 6 3/4 x 10

Heavy-duty 1/2 Hp Dirty Water Submersible Pump with Float Switch - 1,800 Gallons-per-hour Evacuation

Heavy-duty 1/2 Hp Dirty Water Submersible Pump with Float Switch - 1,800 Gallons-per-hour Evacuation Review

Heavy-duty 1/2 Hp Dirty Water Submersible Pump with Float Switch - 1,800 Gallons-per-hour Evacuation Feature

• 1/2 HP dirty submersible water pump with float switch
• Submersible pump is designed for use for drainage for limited period of time
• Maximum pump rate: 1980 Gal/Hour
• Diamater of pipe: 1-1/4"
• Max particle size 1-3/16"

Pump is fully submersible (waterproof sealed) and can be submerged down to a depth of 15 ft. Submersible pump is designed for use for drainage, or transfer of liquid. The pump can drain water or liquid down to about 2-3 inches depth. Draining water from boats or yachts as well as for water aeration and circulation for limited period of time. Disclaimer: corrosive, easily combustible or explosive substances (e.g. gasoline, petroleum, nitro thinner), fats, oils, salt, and water water of toilets and urinals must not be used with this pump. The temperature of the liquid handled should not exceed 35 degree C.

Superior Pump 92330 1/3 HP Thermoplastic Sump Pump with Tethered Float Switch

Superior Pump 92330 1/3 HP Thermoplastic Sump Pump with Tethered Float Switch Review

Superior Pump 92330 1/3 HP Thermoplastic Sump Pump with Tethered Float Switch Feature

• Sturdy 1/3-horsepower motor
• Moves up to 40 gallons of water per minute
• Corrosion resistant thermoplastic construction
• For use in sump applications, UL listed
• Handy 10-foot cord, suction screen

1/3HP split capacitor motor - high effieicncy - low Amp draw, 10' grounded waterproof cord, pumps up to 40 gallons per minute, 2400 gallons per hour, side and bottom intake provides for clog resistant suction, tethered float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, 1-1/4" male iron pipe discharge thread, adapter to 1-1/4" female iron pipe included. One year warranty from Superior Pump Co.

Zoeller BN53 Mighty Mate Sump Pump W/ 15 Ft. Cord & Variable Level Pump Switch 115V 1/3 HP

Zoeller BN53 Mighty Mate Sump Pump W/ 15 Ft. Cord & Variable Level Pump Switch 115V 1/3 HP Review

Zoeller BN53 Mighty Mate Sump Pump W/ 15 Ft. Cord & Variable Level Pump Switch 115V 1/3 HP Feature

• Zoeller
• 53-0029
• Manual Sump Pumps

Zoeller 53-0029 Mighty Mate Sump Pump W/ 15 Ft. Cord & Variable Level Pump Switch 115V 1/3 HP When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability. The Zoeller BN53 Mighty Mate Sump Pump W/ 15 Ft. Cord & Variable Level Pump Switch 115V 1/3 HP is designed with top of the line products to get the job done, it has a non-clogging vortex impeller, engineered thermoplastic base, carbon and ceramic shaft seal, corrosion resistant powder coated epoxy finish, and a cast iron switch case, motor and pump housing. The parts are rust free and there are no screens to clog. The sump pump is watertight and can pump up to 1550 RPM with its HP motor. Zoeller 53-0029 Mighty Mate Sump Pump W/ 15 Ft. Cord & Variable Level Pump Switch 115V 1/3 HP Features: Non-Clogging vortex impeller. 15 ft pump cord and 15 ft. variable level float switch. UL Listed 3-wire cord plug. Corrosion resistant powder coated epoxy finish. No sheet metal parts to rust or corrode. Stainless steel screws, switch arm, guard and handle. No screens to clog. Watertight neoprene ring between motor and pump housing. Motor 115V- 60 Hz, 1550 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protected. Upper and lower sleeve bearings running in bath of oil. Entire unit pressure tested after assembly. Carbon and ceramic shaft seal. Maximum temperature for effluent or dewatering - 130 F (54 C). Passes 1/2" inch spherical solids. 1 1/2" NPT Discharge. Major width - 10 3/32". Height - 10 1/16". Cast iron switch case, motor & pump housing. Engineered thermoplastic base. Engineered, glass-filled, plastic impeller with metal insert. Stainless steel guard & handle. Bearing - lower & upper oil fed cast iron. Supplied with 1 1/2" x 2" adapter *Single piggyback switch included. M53 Model does not include the piggyback switch.

Flotec FP0S1300X-03 Tempest 1/6 HP 1,470 GPH Utility Submersible Pump

Flotec FP0S1300X-03 Tempest 1/6 HP 1,470 GPH Utility Submersible Pump Review

Flotec FP0S1300X-03 Tempest 1/6 HP 1,470 GPH Utility Submersible Pump Feature

• Powered by oil cooled 1/6 Hp motor
• The motor is 115 volt, 60 Hz, single phase 5.0 amp with automatic thermal overload protection
• Pumps 1,470 gallons per hour
• Pump requires a minimum water depth of 1/2" for start-up
• Pumps down to within 3/16" of the pump base

FLOTEC 1/6 H.P. SUBMERSIBLE UTILITY PUMP - This non-corrosive, high strength thermoplastic utility pump is lightweight and portable. Ideal for pumping basements, cleaning aquariums, draining puddles, and pumping from cisterns and sumps. Bottom screened inlet. Pumps to 1320 GPH. Oil-cooled motor has automatic overload protection. Pumps to 3/16 depth. 8 ft.grounded, replaceable power cord. Includes garden hose adapter. 1 NPT discharge. 1/6 HP, 115V motor.

Glentronics, Inc. BWSP 1730 Gallons Per Hour Basement Watchdog Special Back-Up Sump Pump

Glentronics, Inc. BWSP 1730 Gallons Per Hour Basement Watchdog Special Back-Up Sump Pump Review

Glentronics, Inc. BWSP 1730 Gallons Per Hour Basement Watchdog Special Back-Up Sump Pump Feature

• Pumps 2,500 GPH at 0 ft. of lift and 1,730 GPH at 10 ft. of lift
• User-friendly control panel lights up with a warning and describes what to do for easy maintenance
• A sensor monitors battery fluid levels for increased piece of mind
• Includes controller, charger, dual float switch, pump and battery box (battery sold separately)
• Compact pump can be installed even in small or narrow sump pits

The Basement Watchdog battery backup pump, pumps 1730 GPH at a 10' lift. Starts pumping automatically when your main sump pump fails. Monitors battery, power, and pump conditions constantly. Sounds an alarm when problems arise or maintenance is needed. User friendly control panel pin points solutions for easy maintenance. Pumps continuously for over 7.5 hours with The Basement Watchdog 7.5 hour standby battery, model

Glentronics, Inc. BW4000 1730 Gallons Per Hour Basement Watchdog Combination Primary and Back-Up Pump System

Glentronics, Inc. BW4000 1730 Gallons Per Hour Basement Watchdog Combination Primary and Back-Up Pump System Review

Glentronics, Inc. BW4000 1730 Gallons Per Hour Basement Watchdog Combination Primary and Back-Up Pump System Feature

• Includes 1/3 HP sump pump and Watchdog Special battery back-up
• Package contains: Controller, charger, two dual micro reed float switches, primary pump and backup pump, instruction manual (battery and acid sold separately)
• Back-up starts immediately after loss of power or if flow of water is too great for the AC pump alone
• Back-up features unique monitoring systems to diagnose problems and sound an alarm
• Compact, fits in pits as small as 12-Inch in diameter.

BW4000 Features: -Pump system.-Package contains: Controller, charger, two dual micro reed float switches, primary pump and backup pump, instruction manual (battery and acid sold separately).-Material: Acrylonitrile butadiene styrene.-Offers two combination sump pump systems designed to provide both primary and battery backup pump capabilities.-Primary pump will operate as long as it is receiving AC power.-Power is interrupted, or if more water is coming into the sump than the AC pump can handle, the backup sump pump will begin pumping automatically.-Backup system has unique monitoring features that diagnose a problem and sound an alarm.-Light on the display panel of the control unit will indicate the cause of the alarm and the corrective action.-Two systems have been pre-assembled for easy installation.-Compact, fits in pits as small as 12'' in diameter.-Dual float switches for added protection.-Primary float switch has a protective cage.-Engine HP: 0.5 (Primary) and 0.33 (Backup).-Primary system pumping capacity: 4400 GPH @ 0' or 3200 GPH @ 10'.-Backup system pumping capacity: 2500 GPH @ 0' or 1730 GPH @ 10'. Color/Finish: -Color: Silver and Black. Specifications: -Power supply requirements: 115 volts AC. Dimensions: -Dimensions: 18'' H x 11'' W x 8.75'' D. Warranty: -2-Year warranty. Disclaimer: -User-friendly controller sounds an alarm, illuminates a warning light and describes what to do for easy maintenance.

Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp

Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp Review

Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp Feature

• 1/3 H.P. motor
• 1-1/2" NPT Discharge & Passes 2" spherical solids
• Non-clogging vortex impeller design
• Durable cast iron switch case, motor, and pump housing
• Automatic with float activated switch

Zoeller Pump Co. M-53 Mighty Mate clear effluent or dewatering submersible pump. Choice of many plumbers and contractors. 1/3 HP cast iron housing with plastic vortex impeller.

9ft. power cord. Truely a all star pump. Powder coated epoxy CI and SS fastners. Oil filled motor with thermal overload. CSA UL SSPMA